Breckwell Pellet Stoves Manual
Circuit board upgrade kit for Breckwell pellet stove models P20, P24, P26, P32I, P2000 & P2700. This kit also fits some P23 models. Double check the settings and serial number on your old board. The ash content of the pellet fuel should be less than 1% and the calorific value approximately 8200 BTU/LB. Avoid high ash content fuels because this will rapidly fill up the burn pot and eventually cut off the combustion air supply. Commercial and industrial installations of Breckwell Pellet Stoves should not be used since. Read this entire manual before you install and use your pellet stove. Failure to follow instructions may result in property damage, bodily injury, or even death! (See specific installation details for clearances and other installation requirements). Breckwell Hearth Products P24 The Blazer Pellet Stove Insert with Black Door - SP24I Get Your Home Glowing Big heat and rich tradition are what the Blazer insert is all about. Based on the decades of tradition and dedication to quality, this insert bring. Read and download Breckwell Stove P23FS User's Manual online. Download free Breckwell user manuals, owners manuals, instructions, warranties and installation guides, etc. I helped a friend install an older Breckwell P24 pellet stove this weekend. Once we get it lit it will not automatically feed the pellets. The green light is on and both fans are blowing. Pushing the manual feed button feeds pellets just fine, but it will not do it automatically.
Thank you for purchasing the Breckwell Pellet Burning Stove. You are now prepared to burn
wood in the most efficient, convenient way possible. To achieve the safest, most efficient and
most enjoyable performance from your stove, you must do three things: 1) Install it properly;
2) Operate it correctly; and 3) Maintain it regularly. The purpose of this manual is to help you
do all three.
PLEASE read this entire manual before installation and use of this pellet fuel-burning
room heater. Failure to follow these instructions could result in property damage,
bodily injury or even death.
Keep this manual handy for future reference.
Your Breckwell P2000 comes as a fireplace insert or as a freestanding stove with a pedestal.
This stove has been independently tested to ASTM E1509-95 Standard Specification for
Room Heaters, Pellet Fuel Burning Type 1, UL 1482-1998 Standard for Solid Fuel Room
Heaters, Oregon Administrative Rules for Mobile Homes (814-23-900 through 814-23-909)
and Installation as a Stove Heater.
This pellet stove, when installed, must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70.
This appliance is designed specifically for use only with pelletized wood. It is designed for
residential installation according to current national and local building codes as a freestanding
room heater. It is also approved as a mobile home heater which is designed for connection to
an outside combustion air source.
The stove will not operate using natural draft or without a power source for the blower
systems and fuel feed system and must not be burned with any type of coal (see PROPER
FUEL).
This stove is designed to provide the optimum proportions of fuel and air to the fire in order to
burn free of smoke and soot. Any blockage of the air supply to or from the stove will seriously
degrade its performance and will be evidenced by a smoking exhaust and a sooting window.
For best operation the ash content of the pellet fuel should be less than 1% and the calorific
value approximately 8200 BTU/LB. Avoid high ash content fuels because this will rapidly fill
up the burn pot and eventually cut off the combustion air supply.
Commercial and industrial installations of Breckwell Pellet Stoves should not be used since
operational control is often not well managed in these settings.
INTRODUCTION
Default: Y (Yes).use-card-authentication(Y/N/USERNAME) - Enable card-based authentication. Coin tube box. They might also be required to enter theirpassword, depending on the 'mode' setting. This is designed for use withdedicated hardware card readers.If Y: The card number is validated against the user's card-numberfield.If USERNAME: The card value is interpreted as a username.The user is prompted for a password if required.Default: N (No).show-jobs-from-queuesFilters the list of jobs to only those print queues listed.
2
IMPORTANT INFORMATION
Model: _____P2000 ________________
Style: ____________________________
Serial Number:_____________________
Purchase Date: ____________________
Purchased From:___________________
___________________
___________________
MAIL YOUR WARRANTY CARD TODAY
To receive full warranty coverage, you will
need to show evidence of the date you
purchased your stove. We suggest that
you attach your sales invoice to this page,
and fill in the form on the left, so that you
will have all the information you need in
one place should the need for service or
information occur.